RPSC Assistant Agriculture Engineer Bharti 2025

🚨 RPSC Assistant Agriculture Engineer Bharti 2025: राजस्थान में कृषि अभियंता के 281 पदों पर बम्पर मौका! अभी अप्लाई करें! 🚨 क्या आप कृषि क्षेत्र में इंजीनियरिंग की डिग्री रखते हैं और राजस्थान में सरकारी नौकरी (Sarkari Naukri) का सपना देख रहे हैं? तो आपके लिए राजस्थान लोक सेवा आयोग (RPSC) ने असिस्टेंट एग्रीकल्चर इंजीनियर (Assistant Agriculture Engineer) के 281 पदों पर भर्ती का सुनहरा अवसर दिया है! यह उन सभी उम्मीदवारों के लिए एक शानदार मौका है जो राजस्थान की कृषि और ग्रामीण विकास में अपना योगदान देना चाहते हैं. आवेदन आज, 28 जुलाई 2025 से शुरू हो गए हैं और आखिरी तारीख 26 अगस्त 2025 है. इस सुनहरे अवसर को हाथ से जाने न दें, पूरी जानकारी के लिए नीचे पढ़ें और तुरंत आवेदन करें!

📊 पदों का विवरण (Vacancy Details)

✅ पात्रता मानदंड (Eligibility Criteria)

RPSC असिस्टेंट एग्रीकल्चर इंजीनियर बनने के लिए क्या चाहिए?

• शैक्षणिक योग्यता (Educational Qualification): उम्मीदवारों को किसी मान्यता प्राप्त विश्वविद्यालय से एग्रीकल्चर इंजीनियरिंग में ग्रेजुएशन (Graduation in Agriculture Engineering) पूरा किया होना चाहिए.
• भाषा और संस्कृति का ज्ञान (Language & Culture Knowledge): देवनागरी लिपि में लिखी हिंदी का व्यावहारिक ज्ञान और राजस्थानी संस्कृति का ज्ञान होना आवश्यक है.
• महत्वपूर्ण: आवेदन करने से पहले सभी उम्मीदवार आधिकारिक नोटिफिकेशन (Official Notification) को पूरी तरह से अवश्य पढ़ें.

BSF Constable Tradesman Bharti 2025

🗓️ महत्वपूर्ण तिथियाँ (Important Dates)

पुष्टि के लिए RPSC की आधिकारिक वेबसाइट (Official Website) ज़रूर चेक करें.

💸 आवेदन शुल्क (Application Fee)

भुगतान का तरीका (Payment Mode – Online): आप डेबिट कार्ड (Debit Card), क्रेडिट कार्ड (Credit Card), इंटरनेट बैंकिंग (Internet Banking), IMPS, कैश कार्ड (Cash Card) / मोबाइल वॉलेट (Mobile Wallet) का उपयोग करके भुगतान कर सकते हैं.

IB Security Assistant Bharti 2025

🔞 आयु सीमा (Age Limits As On 01 January 2026)

• न्यूनतम आयु (Minimum Age): 20 वर्ष
• अधिकतम आयु (Maximum Age): 40 वर्ष

RPSC अपने नियमों के अनुसार असिस्टेंट एग्रीकल्चर इंजीनियर पद के लिए आयु में छूट (Age Relaxation) भी प्रदान करता है.

🎯 चयन प्रक्रिया (Mode Of Selection)

RPSC असिस्टेंट एग्रीकल्चर इंजीनियर के लिए आपका चयन इन चरणों के आधार पर होगा:

1. लिखित परीक्षा (Written Exam)
2. दस्तावेज़ सत्यापन (Document Verification)
3. चिकित्सा परीक्षण (Medical Examination)

📝 RPSC असिस्टेंट एग्रीकल्चर इंजीनियर ऑनलाइन फॉर्म 2025 कैसे भरें (How To Fill Online Form)

RPSC असिस्टेंट एग्रीकल्चर इंजीनियर पद के लिए आवेदन करने के इच्छुक उम्मीदवार 26 अगस्त 2025 से पहले अपना आवेदन ऑनलाइन जमा कर सकते हैं.

1. सीधे आवेदन करने के लिए नीचे दिए गए “अप्लाई ऑनलाइन लिंक” (Apply Online Link) का उपयोग करें.
2. वैकल्पिक रूप से, ऑनलाइन आवेदन प्रक्रिया पूरी करने के लिए RPSC की आधिकारिक वेबसाइट (Official Website of RPSC) पर जाएं.
3. सुनिश्चित करें कि आप 26 अगस्त 2025 की समय सीमा से पहले आवेदन पूरा कर लें.

RRB Paramedical Staff Recruitment 2025

🔗 कुछ उपयोगी महत्वपूर्ण लिंक (Some Useful Important Links)

हमारे साथ जुड़ें!

क्या आप नवीनतम सरकारी नौकरी अपडेट्स, परीक्षा सूचनाएँ, एडमिट कार्ड और रिजल्ट की जानकारी सीधे अपने फ़ोन पर पाना चाहते हैं? तो हमारे सोशल मीडिया चैनल्स को अभी फॉलो करें!

• हमारा WhatsApp चैनल जॉइन करें:
  • अभी फॉलो करें!
• हमारा Telegram चैनल जॉइन करें:
  • अभी फॉलो करें!

इन चैनल्स पर आपको सबसे तेज़ और सटीक जानकारी मिलेगी, ताकि आप कोई भी महत्वपूर्ण अपडेट मिस न करें

❓ अक्सर पूछे जाने वाले प्रश्न (FAQs – Frequently Asked Questions)

Q1: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर भर्ती 2025 के लिए कुल कितने पद हैं?

A1: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर भर्ती 2025 के लिए कुल 281 पद हैं.

Q2: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर के लिए आवेदन कब शुरू होंगे और अंतिम तिथि क्या है?

A2: आवेदन 28 जुलाई 2025 से शुरू हो चुके हैं, और आवेदन करने की अंतिम तिथि 26 अगस्त 2025 है.

Q3: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर के लिए न्यूनतम और अधिकतम आयु क्या है?

A3: न्यूनतम आयु 20 वर्ष और अधिकतम आयु 40 वर्ष है (आयु की गणना 01 जनवरी 2026 तक होगी). सरकारी नियमों के अनुसार आयु में छूट लागू होगी.

Q4: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर के लिए शैक्षिक योग्यता क्या है?

A4: उम्मीदवारों को किसी मान्यता प्राप्त विश्वविद्यालय से एग्रीकल्चर इंजीनियरिंग में ग्रेजुएशन पूरा किया होना चाहिए. साथ ही, देवनागरी लिपि में लिखी हिंदी का व्यावहारिक ज्ञान और राजस्थानी संस्कृति का ज्ञान भी आवश्यक है.

Q5: आवेदन शुल्क कितना है?

A5: सामान्य और अन्य राज्य के उम्मीदवारों के लिए ₹600/- शुल्क है, जबकि SC/ST, OBC/BC उम्मीदवारों के लिए ₹400/- है. सुधार शुल्क ₹500/- है.

Q6: RPSC असिस्टेंट एग्रीकल्चर इंजीनियर का चयन कैसे होगा?

A6: चयन प्रक्रिया में लिखित परीक्षा, दस्तावेज़ सत्यापन और चिकित्सा परीक्षण शामिल हैं.

RPSC Assistant Agriculture Engineer Exam Pattern (परीक्षा पैटर्न):

• विषय (Subject): संबंधित विषय (Concerned Subject – योग्यता के अनुसार निर्धारित)
• प्रश्नों की संख्या (No. of Questions): 150
• कुल अंक (Total Marks): 150
• परीक्षा अवधि (Examination Duration): 2 घंटे 30 मिनट (2 Hours & 30 Minutes)
• नकारात्मक अंकन (Negative Marking): प्रत्येक गलत उत्तर के लिए एक-तिहाई (1/3) अंक काटे जाएंगे.
• अनिवार्य विकल्प ‘5’ (Mandatory Option ‘5’): यदि आप किसी प्रश्न का प्रयास नहीं कर रहे हैं (If not attempting a question), तो आपको सर्कल ‘5’ को गहरा करना होगा (darken circle ‘5’). यदि पांच में से कोई भी सर्कल गहरा नहीं किया गया है, तो प्रश्न के अंकों का 1/3 भाग काट लिया जाएगा (1/3rd mark will be deducted).
• अयोग्यता (Disqualification): यदि 10% से अधिक प्रश्नों में पांच में से कोई भी सर्कल गहरा नहीं किया गया है, तो उम्मीदवार को अयोग्य घोषित कर दिया जाएगा (Not darkening any of the five circles in more than 10% questions will lead to disqualification).

यहां मुख्य बात “संबंधित विषय (Concerned Subject – योग्यता के अनुसार निर्धारित)” है. चूंकि शैक्षिक योग्यता (qualification) कृषि इंजीनियरिंग में स्नातक (Graduation in Agriculture Engineering) है, इसलिए MCQ उस विषय के मुख्य विषयों को कवर करेंगे (the MCQs should cover core subjects within that discipline).

“कृषि इंजीनियरिंग” की व्यापकता को देखते हुए (Given the breadth of “Agriculture Engineering”), मैं विभिन्न मूलभूत क्षेत्रों से MCQ प्रदान करूँगा. मेरा लक्ष्य एक ऐसा मिश्रण देना है जो एक विशिष्ट स्नातक कृषि इंजीनियरिंग पाठ्यक्रम का प्रतिनिधित्व करता हो (I will aim for a mix that represents a typical undergraduate agriculture engineering syllabus).

यहां 100 बहुविकल्पीय प्रश्न (MCQs) दिए गए हैं जो कृषि इंजीनियरिंग के विभिन्न पहलुओं को कवर करते हैं, जो RPSC असिस्टेंट एग्रीकल्चर इंजीनियर परीक्षा के लिए प्रासंगिक होंगे (which would be relevant for the RPSC Assistant Agriculture Engineer exam). इन प्रश्नों में फार्म मशीनरी (Farm Machinery), मृदा एवं जल संरक्षण (Soil and Water Conservation), सिंचाई (Irrigation), फसल कटाई के बाद की तकनीक (Post-Harvest Technology), कृषि प्रसंस्करण इंजीनियरिंग (Agricultural Process Engineering) और कृषि में नवीकरणीय ऊर्जा (Renewable Energy in Agriculture) जैसे विषय शामिल होंगे.

RPSC Assistant Agriculture Engineer Exam – Agriculture Engineering MCQs

Instructions: Choose the most appropriate answer from the given options.

Farm Machinery & Power

• What is the primary function of a tractor’s differential lock?
  a) To increase turning radius
  b) To improve braking efficiency
  c) To lock the drive wheels together for better traction
  d) To reduce engine speed
• Which type of plow is most suitable for deep plowing in hard soils?
  a) Disc plow
  b) Mouldboard plow
  c) Chisel plow
  d) Rotavator
• The unit of power commonly used for agricultural machinery is:
  a) Kilowatt-hour
  b) Horsepower
  c) Joule
  d) Newton-meter
• What is the purpose of a seed drill?
  a) To harvest crops
  b) To apply pesticides
  c) To sow seeds at a uniform depth and spacing
  d) To prepare the seedbed
• Which component converts the reciprocating motion of the piston into rotary motion in an IC engine?
  a) Camshaft
  b) Crankshaft
  c) Connecting rod
  d) Flywheel
• The term “slip” in a tractor wheel refers to:
  a) The difference between theoretical and actual distance covered
  b) The forward speed of the tractor
  c) The rate of wear on tires
  d) The amount of power transmitted
• Which type of engine uses a spark plug for ignition?
  a) Diesel engine
  b) Petrol engine
  c) Both a and b
  d) Steam engine
• A two-wheel drive tractor is primarily suited for:
  a) Heavy draft operations
  b) Wet and muddy conditions
  c) Light field operations and transport
  d) Steep slopes
• Which implement is used for secondary tillage?
  a) Mouldboard plow
  b) Disc harrow
  c) Subsoiler
  d) Chisel plow
• What is the main advantage of a power tiller over a tractor for small landholdings?
  a) Higher speed
  b) Lower fuel consumption
  c) Greater maneuverability and lower cost
  d) More draft power
• The draft of an implement is measured in:
  a) kN (kiloNewton)
  b) kW (kilowatt)
  c) kWh (kilowatt-hour)
  d) RPM (revolutions per minute)
• Which of the following is a cutting part of a mouldboard plow?
  a) Landside
  b) Shin
  c) Share
  d) Frog
• The main function of a combine harvester is to:
  a) Plough and sow
  b) Harvest, thresh, and clean grain
  c) Spray pesticides
  d) Prepare land for planting
• What is the typical operating speed range of a tractor in plowing operations?
  a) 1-3 km/h
  b) 4-7 km/h
  c) 8-12 km/h
  d) 15-20 km/h
• Which component of an engine is responsible for controlling the opening and closing of valves?
  a) Crankshaft
  b) Camshaft
  c) Flywheel
  d) Piston

Soil and Water Conservation Engineering

• Which of the following is a biological method of soil conservation?
  a) Terracing
  b) Contour plowing
  c) Afforestation
  d) Gully plugging
• The Universal Soil Loss Equation (USLE) is used to estimate:
  a) Wind erosion
  b) Water erosion
  c) Soil fertility
  d) Soil moisture content
• What is the main purpose of contour bunding?
  a) To store water
  b) To prevent soil erosion on sloping lands
  c) To increase infiltration
  d) All of the above
• Gully erosion is a severe form of:
  a) Wind erosion
  b) Sheet erosion
  c) Rill erosion
  d) Concentrated flow erosion
• Which structure is built across a gully to reduce flow velocity and promote siltation?
  a) Diversion ditch
  b) Terrace
  c) Check dam
  d) Contour bund
• What is meant by “keyline design” in soil and water conservation?
  a) A method of calculating water runoff
  b) A design principle for dams
  c) A landscape design technique to improve water harvesting and distribution
  d) A specific type of terracing
• The term “bench terracing” is most commonly used on:
  a) Flat lands
  b) Steep slopes
  c) Waterlogged areas
  d) Deserts
• Wind erosion is most prevalent in:
  a) Humid regions
  b) Arid and semi-arid regions
  c) Coastal areas
  d) Mountainous regions
• Which type of vegetation cover is most effective in preventing soil erosion?
  a) Sparse crops
  b) Dense perennial grasses
  c) Bare soil
  d) Annual crops
• What is the primary function of a grassed waterway?
  a) To transport irrigation water
  b) To safely convey excess runoff water
  c) To filter pollutants
  d) To provide grazing for livestock
• Which of the following is an example of an in-situ moisture conservation technique?
  a) Farm ponds
  b) Terracing
  c) Contour cultivation
  d) Check dams
• The process of land leveling is done to:
  a) Improve drainage and irrigation efficiency
  b) Increase soil fertility
  c) Plant new crops
  d) Control weeds
• What is the main objective of watershed management?
  a) To maximize water runoff
  b) To optimize the use of land and water resources in a watershed
  c) To promote deforestation
  d) To prevent groundwater recharge
• Which factor significantly influences the rate of soil erosion?
  a) Rainfall intensity
  b) Soil type
  c) Slope of the land
  d) All of the above
• The process of removing excess water from the soil profile is called:
  a) Irrigation
  b) Leaching
  c) Drainage
  d) Infiltration

Irrigation and Drainage Engineering

• Which irrigation method is known for the highest water application efficiency?
  a) Flood irrigation
  b) Furrow irrigation
  c) Sprinkler irrigation
  d) Drip irrigation
• The term “duty of water” refers to:
  a) The amount of water required by a crop
  b) The area of land irrigated per unit of water supplied
  c) The rate of water flow in a canal
  d) The volume of water in a reservoir
• What is the main advantage of a sprinkler irrigation system over a surface irrigation system?
  a) Lower initial cost
  b) Less energy consumption
  c) Uniform water distribution, especially on uneven terrain
  d) Simple operation
• Which of the following is a type of surface irrigation method?
  a) Drip irrigation
  b) Subsurface irrigation
  c) Basin irrigation
  d) Sprinkler irrigation
• The instrument used to measure the rate of rainfall is called a:
  a) Barometer
  b) Anemometer
  c) Rain gauge
  d) Hygrometer
• What is the purpose of a weir in an irrigation canal?
  a) To generate electricity
  b) To measure water flow and regulate water levels
  c) To store water
  d) To filter out impurities
• The term “consumptive use” of water by a crop refers to:
  a) The water lost due to deep percolation
  b) The water transpired by the plant and evaporated from the soil surface
  c) The water applied during irrigation
  d) The water stored in the plant tissues
• Which type of well is typically dug manually to extract groundwater from shallow aquifers?
  a) Tube well
  b) Artesian well
  c) Dug well
  d) Bore well
• What is the primary purpose of a drainage system in agricultural fields?
  a) To increase soil salinity
  b) To remove excess water from the soil for optimal plant growth
  c) To supply water for irrigation
  d) To prevent nutrient leaching
• The measurement of water depth in a well is usually done using a:
  a) Pressure gauge
  b) Sounding device or electric water level indicator
  c) Flow meter
  d) Thermometer
• Which of the following best describes the term “irrigation efficiency”?
  a) Ratio of water delivered to the field to water diverted from the source
  b) Ratio of water stored in the root zone to water applied to the field
  c) Ratio of water consumed by crop to water supplied
  d) Ratio of water lost to water gained
• What is the main concern with using highly saline water for irrigation?
  a) It increases soil organic matter.
  b) It can lead to soil salinization and reduce crop yields.
  c) It improves soil structure.
  d) It has no effect on crops.
• Which of the following is an advantage of drip irrigation?
  a) High evaporation losses
  b) Suitable for all terrain types without modification
  c) Efficient use of water and fertilizers, reduced weed growth
  d) High initial cost and complex maintenance
• The device used to measure the velocity of water flow in an open channel is a:
  a) Pitot tube
  b) Current meter
  c) Venturimeter
  d) Orifice meter
• What is the primary objective of a micro-irrigation system?
  a) To irrigate large areas rapidly
  b) To apply water at low rates directly to the plant root zone
  c) To utilize groundwater exclusively
  d) To cool down the plant canopy

Agricultural Process Engineering & Post-Harvest Technology

• What is the primary goal of drying agricultural products?
  a) To increase their weight
  b) To reduce moisture content to prevent spoilage
  c) To enhance their color
  d) To make them more palatable
• Which unit operation involves the separation of grain from straw?
  a) Cleaning
  b) Milling
  c) Threshing
  d) Drying
• What is the primary purpose of a sieve in grain processing?
  a) To heat the grain
  b) To separate particles based on size
  c) To add moisture
  d) To grind the grain
• The process of converting agricultural waste into valuable products like compost or biogas is known as:
  a) Incineration
  b) Recycling/Valorization
  c) Fermentation
  d) Pasteurization
• What is the recommended moisture content for safe storage of most food grains (e.g., paddy, wheat)?
  a) 20-25%
  b) 10-14%
  c) 5-8%
  d) 30-35%
• Which of the following is a common method for cooling perishable agricultural produce?
  a) Sun drying
  b) Refrigeration
  c) Roasting
  d) Grinding
• The term “milling” in the context of rice processing refers to:
  a) Removing the husk and bran layers to produce white rice
  b) Drying the paddy
  c) Storing the rice
  d) Cooking the rice
• What is the primary aim of grading agricultural products?
  a) To reduce their market value
  b) To sort them according to quality, size, and appearance
  c) To increase their shelf life indefinitely
  d) To add flavor
• The process of reducing the size of agricultural materials by crushing or grinding is called:
  a) Separation
  b) Comminution
  c) Mixing
  d) Extraction
• Which packaging material is biodegradable and commonly used for fruits and vegetables?
  a) Plastic film
  b) Aluminum foil
  c) Cardboard boxes
  d) Glass containers
• What is the function of a parboiling process in paddy?
  a) To remove moisture completely
  b) To improve nutritional value, milling recovery, and cooking quality
  c) To whiten the rice
  d) To remove impurities
• Which type of dryer uses direct contact between hot air and the product for drying?
  a) Cabinet dryer
  b) Solar dryer
  c) Tray dryer
  d) All of the above (as they can use hot air directly)
• The unit operation involved in squeezing juice from fruits is:
  a) Filtration
  b) Evaporation
  c) Pressing/Extraction
  d) Distillation
• What is the main benefit of controlled atmosphere (CA) storage for fruits and vegetables?
  a) It makes them ripen faster.
  b) It extends their shelf life by altering the atmospheric composition.
  c) It adds artificial flavors.
  d) It prevents all microbial growth.
• The process of converting milk into cheese is an example of:
  a) Physical processing
  b) Chemical processing
  c) Fermentation/Bioprocessing
  d) Mechanical processing

Renewable Energy Sources in Agriculture

• Which renewable energy source is primarily used for water pumping in remote agricultural areas?
  a) Geothermal energy
  b) Hydropower
  c) Solar energy (photovoltaic pumps)
  d) Wind energy
• Biogas is primarily composed of:
  a) Carbon dioxide and nitrogen
  b) Methane and carbon dioxide
  c) Hydrogen and oxygen
  d) Sulfur dioxide and methane
• What is the main feedstock for biogas production in a typical agricultural setting?
  a) Crop residues
  b) Animal dung (manure)
  c) Forest wood
  d) Coal
• Which of the following is a direct application of solar energy in agriculture?
  a) Wind turbine for electricity
  b) Solar water heater for dairy farms
  c) Hydroelectric power plant
  d) Geothermal heating
• The conversion of sunlight directly into electricity is achieved by:
  a) Solar thermal collectors
  b) Photovoltaic (PV) cells
  c) Solar concentrators
  d) Solar ovens
• What is the primary use of solar dryers in agriculture?
  a) Generating electricity
  b) Drying crops, fruits, and vegetables
  c) Heating water for irrigation
  d) Powering farm machinery
• Biomass can be converted into energy through processes like:
  a) Combustion
  b) Gasification
  c) Pyrolysis
  d) All of the above
• Which type of wind turbine is typically used for water pumping in agricultural applications?
  a) Horizontal axis wind turbine (HAWT) for electricity generation
  b) Vertical axis wind turbine (VAWT)
  c) Multiblade wind pump
  d) Single blade wind turbine
• What is the main advantage of using renewable energy in agriculture?
  a) High operating costs
  b) Reduced dependence on fossil fuels and lower environmental impact
  c) Limited availability
  d) Complex technology
• Ethanol, produced from agricultural crops, is an example of:
  a) Fossil fuel
  b) Biofuel
  c) Nuclear fuel
  d) Geothermal energy

General Agriculture / Agronomy / Soil Science (Basic Concepts)

• Which nutrient is considered the “master nutrient” for plant growth?
  a) Phosphorus
  b) Potassium
  c) Nitrogen
  d) Calcium
• The process by which plants convert light energy into chemical energy is called:
  a) Respiration
  b) Transpiration
  c) Photosynthesis
  d) Germination
• What is the ideal pH range for most agricultural crops?
  a) 3.0-4.5
  b) 5.5-7.0
  c) 8.0-9.5
  d) 10.0-11.0
• The primary component of organic matter in soil is:
  a) Sand
  b) Silt
  c) Clay
  d) Decomposed plant and animal residues
• Which cropping system involves growing two or more crops simultaneously on the same field?
  a) Monocropping
  b) Intercropping
  c) Crop rotation
  d) Fallowing
• The term “rabi crops” refers to crops grown in which season in India?
  a) Monsoon season
  b) Winter season
  c) Summer season
  d) Autumn season
• Which of the following is a micronutrient required by plants?
  a) Nitrogen
  b) Phosphorus
  c) Iron
  d) Potassium
• What is the function of rhizobium bacteria in leguminous plants?
  a) They cause plant diseases.
  b) They fix atmospheric nitrogen.
  c) They absorb phosphorus from the soil.
  d) They produce toxins.
• The practice of growing different crops in succession on the same land to maintain soil fertility is known as:
  a) Mixed cropping
  b) Crop rotation
  c) Multiple cropping
  d) Relay cropping
• Which type of soil has the highest water holding capacity?
  a) Sandy soil
  b) Loamy soil
  c) Clayey soil
  d) Silt loam

Rajasthan GK / Culture (as per eligibility criteria – conceptual)

• Which desert is predominantly found in Rajasthan?
  a) Gobi Desert
  b) Sahara Desert
  c) Thar Desert
  d) Atacama Desert
• The famous Pushkar Fair of Rajasthan is primarily associated with:
  a) Cattle trading and religious festival
  b) Handicrafts exhibition
  c) Music and dance festival
  d) Flower show
• Which is the state animal of Rajasthan?
  a) Tiger
  b) Camel
  c) Elephant
  d) Leopard
• What is “Ghoomar”?
  a) A type of Rajasthani cuisine
  b) A traditional folk dance of Rajasthan
  c) A musical instrument
  d) A desert plant
• Which historical fort is located in Jaipur, Rajasthan?
  a) Mehrangarh Fort
  b) Chittor Fort
  c) Amber Fort
  d) Jaisalmer Fort

General Hindi (Devanagari Script – Conceptual)

• ‘सूर्य’ शब्द का पर्यायवाची शब्द है:
  a) चाँद
  b) रवि
  c) पवन
  d) अग्नि
• ‘जल’ शब्द का विलोम शब्द है:
  a) पानी
  b) थल
  c) वायु
  d) आग
• “अतिथि” का बहुवचन क्या होगा?
  a) अतिथियाँ
  b) अतिथियों
  c) अतिथि
  d) अतिथिगण
• ‘जो पढ़ा-लिखा न हो’ – इस वाक्यांश के लिए एक शब्द क्या होगा?
  a) विद्वान
  b) अनपढ़
  c) ज्ञानी
  d) बुद्धिमान
• ‘भारत’ शब्द का विशेषण क्या होगा?
  a) भारती
  b) भारतीय
  c) भरत
  d) भारतवर्ष

Mixed/Applied Concepts (Agriculture Engineering)

• The efficiency of a centrifugal pump is maximum when:
  a) Suction head is very high
  b) Discharge is zero
  c) It is operating at its design point (BEP)
  d) It is operating at very low speed
• What is the role of a prime mover in an agricultural machinery system?
  a) To transmit power
  b) To generate power for operation
  c) To control speed
  d) To absorb power
• Which type of sprayer is suitable for tall trees?
  a) Hand sprayer
  b) Knapsack sprayer
  c) Power sprayer (with boom or gun)
  d) Duster
• The process of converting solid biomass into liquid fuel is called:
  a) Gasification
  b) Fermentation
  c) Liquefaction
  d) Pyrolysis (bio-oil production) or Fermentation (ethanol)
• What is the critical moisture content in drying agricultural products?
  a) The moisture content below which drying rate increases rapidly
  b) The moisture content at which drying rate becomes constant
  c) The moisture content below which drying rate decreases rapidly
  d) The maximum moisture content a product can hold
• The hydraulic conductivity of soil is a measure of:
  a) Its ability to hold water
  b) Its ability to transmit water
  c) Its strength
  d) Its organic matter content
• Which of the following is a common issue with prolonged use of chemical fertilizers?
  a) Improved soil structure
  b) Increased soil biodiversity
  c) Soil acidification and nutrient imbalance
  d) Enhanced water retention
• What is the main advantage of conservation tillage over conventional tillage?
  a) Higher fuel consumption
  b) Increased soil erosion
  c) Reduced soil erosion and improved soil health
  d) More intensive land preparation
• The amount of heat required to raise the temperature of a unit mass of a substance by one degree Celsius is called:
  a) Latent heat
  b) Specific heat
  c) Heat of fusion
  d) Heat of vaporization
• Which of the following is an example of value addition in agricultural produce?
  a) Harvesting raw potatoes
  b) Selling fresh fruits directly
  c) Processing tomatoes into ketchup
  d) Storing wheat grains in a warehouse

Note: The exact weightage of each subject area in the actual RPSC exam will depend on their specific syllabus, which is typically detailed in the official notification. This set of MCQs aims to cover a broad range of relevant topics for a Bachelor’s degree in Agriculture Engineering.